Author: vasanthz
Posted: Tue Nov 08, 2016 10:59 pm (GMT 5.5)
Hello,
I feel that 3:00 minutes is the default value.
If you look here http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.ieam900/m012949.htm
Note: Just noticed that the link is for z/OS 2.2, you might want to look up the same link for your OS version for the defaults.
link says
This default setting output looks a lot similar to your output except the DASD=00:45 & that is probably you have MIH DASD=00:45 on the PARMLIB member.
_________________
MAKE THE FORUM, GREAT AGAIN!!!
Posted: Tue Nov 08, 2016 10:59 pm (GMT 5.5)
Hello,
I feel that 3:00 minutes is the default value.
If you look here http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.ieam900/m012949.htm
Note: Just noticed that the link is for z/OS 2.2, you might want to look up the same link for your OS version for the defaults.
link says
| Code: |
| IOS086I hh.mm.ss MIH & IOT TIMES MOUNTMSG = YES, HALT=00:05, MNTS=03:00, UREC=03:00, DASD=00:15, TAPE=03:00, GRAF=03:00, CTC =03:00, COMM=03:00, CHAR=03:00, IOTDASD=00:00 US01=00:05 UDEV= 0420, 0421, 0422, 0423, 0424, 0425, 0426, 0427, 0428, 0429, 042A, 042B, 042C, 042D, 042E, 042F, US02=00:11 UDEV= 0420, 0421, 0422, 0423, 0424, 0425, 0426, 0427, 0428, 0429, 042A, 042B, 042C, 042D, 042E, 042F, US03=00:00 UDEV= 0490, 0491, 0492, 0493. |
| Quote: |
In this example, the installation used the IBM® supplied defaults for all device classes. |
This default setting output looks a lot similar to your output except the DASD=00:45 & that is probably you have MIH DASD=00:45 on the PARMLIB member.
_________________
MAKE THE FORUM, GREAT AGAIN!!!